Electrolux WAGL3E200, User Manual

Page: 17 / 32

The appliance does not drain the
water.
11.4 Change a function
You can change only some functions be-
fore they operate.
1.
Press button 4 . The indicator flash-
es.
2. Change the function set.
11.5 Set the delay start
1.
Press button
5
again and again until
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2.
Press button 4 , the appliance starts
the countdown of the delay start.
When the countdown is completed,
the programme starts automatically.
Before you press button 4 to
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the
Steam programme.
11.6 Cancel the delay start
1.
Press button 4 . The related indica-
tor flashes.
2.
Press button 5 again and again until
the display shows 0’ .
3.
Press button
4
. The programme
starts.
11.7 Open the door
While a programme or the delay start op-
erates, the appliance door is locked.
To open the appliance door:
1.
Press button 4 . The door lock sym-
bol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
4
. The programme or the
delay start continues.
If the temperature and level of the
water in the drum are too high,
the door lock symbol stays on and
you cannot open the door. To
open the door do the steps that
follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in
the drum.
If you deactivate the appliance, it
is necessary to set the pro-
gramme again.
12. AT THE END OF THE PROGRAMME
12.1 At the end of the
programme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
comes on.
• The indicator of the Start/Pause button
4 goes off.
• The door lock symbol goes off.
• Press button
1 to deactivate the ap-
pliance. After five minutes from the end
of the programme, the energy saving
function automatically deactivates the
appliance.
When you activate the appliance
again, the display show the end of
the last set programme. Turn the
programme knob to set a new cy-
cle.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent mildew
and odours.
• Close the water tap.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent the
creases in the laundry.
ENGLISH 17