Electrolux WA SL3 T 201, User Manual

Page: 15 / 24

2. Press button
1
again to activate the
appliance. Now, you can set a new
washing programme.
The appliance does not drain the wa-
ter.
CHANGE A FUNCTION
You can change only some functions be-
fore they operate.
1. Press button
5 . The indicator flashes.
2. Change the function set.
SET THE DELAY START
1. Press button
6
again and again until
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2. Press button
5
, the appliance starts
the countdown of the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
5
to start the
appliance, you can cancel or change
the set of the delay start.
You cannot set the delay start with the
Steam programme.
CANCEL THE DELAY START
1. Press button
5 . The related indicator
flashes.
2. Press button
6
again and again until
the display shows 0’ .
3. Press button
5
. The programme
starts.
OPEN THE LID
While a programme or the delay start oper-
ates, the lid is locked.
To open the lid:
1. Press button
5 . You can open the lid
2 minutes after the appliance stops.
The door lock symbol in the display
goes off.
2. Open the lid.
3. Close the lid and press button
5
. The
programme or the delay start contin-
ues.
If the temperature and level of the wa-
ter in the drum are too high, the door
lock symbol stays on and you cannot
open the lid . If necessary, do the fol-
lowing procedure to open the lid.
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that there is no water in
the drum.
Important! If you deactivate the appliance,
it is necessary to set the programme again.
AT THE END OF PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
• In the display comes on.
• The indicator of the Start/Pause button
4 goes off.
• You can open the lid 2 minutes after the
appliance stops. The door lock symbol
goes off.
• Press button
1 to deactivate the appli-
ance. After five minutes from the end of
the programme, the AUTO OFF function
automatically deactivates the appliance.
When you activate the appliance again,
the display shows the end of the last
set programme. Turn the programme
knob to set a new cycle.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent mildew
and odours.
• Close the water tap.
The washing programme is completed,
but the 'Rinse Hold' function is on:
– The drum turns regularly to prevent the
creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
To drain the water:
1. If necessary, decrease the spin speed.
2. Press the Start/Pause button
4
. The
appliance drains the water and spins.
3. When the programme is completed
and the door lock symbol goes off, you
can open the door
electrolux 15