BEFORE FIRST USE
1.
To activate the drain system, put 2 litre
of water in the main wash compartment
of the detergent dispenser.
2.
Put a small quantity of detergent in the
main wash compartment of the deter-
gent dispenser. Set and start a pro-
gramme for cotton at the highest tem-
perature without laundry. This removes
all possible dirt from the drum and the
tub.
USING THE APPLIANCE
1.
Open the water tap.
2.
Connect the mains plug to the mains
socket.
For a correct operation of the weight sen-
sor, activate the appliance and set the
programme BEFORE you put the laundry
in the drum.
Activating the appliance and
setting a programme
1.
Press button
1
to activate the appli-
ance.
2.
Turn programme knob
2
to the nec-
essary programme. The programme in-
dicator comes on.
3.
The indicator of button
4
flashes with
red colour.
4.
The display shows the default tempera-
ture and spin and the empty indicator
bars of the available functions.
5.
If it is necessary, press button
10
and
button
9
to change the water temper-
ature and the spin speed.
6.
If necessary, press the related buttons
to add some functions or to set a de-
layed start. The display shows the sym-
bol of the set function and the digit (
I
)
shows the delayed time.
LOADING THE LAUNDRY
1.
Open the appliance door.
2.
The display (
J
) shows the maximum
load for the programme (
MAX
) and the
weight of the laundry (
KG
).
3.
Put the laundry in the drum, one item at
time. Shake the items before you put
them in the drum.
4.
On the display the weight of the laundry
updates by steps of kg 0.5. The weight
is indicative and changes with the type
of the laundry.
If you put in the drum more laundry
than the maximum load, the symbols
MAX
and the value
0.0
start to flash.
You can wash your laundry but the wa-
ter and energy consumption increase.
To have the best consumption and
washing performance remove some
items until the symbols stop to flash.
The overload indication is available only
for programmes with a maximum load
lower than the appliance maximum
load.
5.
Close the door. The value
0.0
near the
symbol
%
on the display shows the
quantity of the detergent to use.
This data is indicative and refers to the
detergent quantity for a maximum load
that the manufacturer recommends.
Caution!
Make sure that no laundry
stays between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
14
Summary of Contents for WA 1668
