Electrolux W4105H, Operating Manual, Page: 12 / 76

12
Procedure for use
To change parameters in the current program
step
See section ”To change parameters in the cur-
rent program step”.
Certain program step parameters can be altered
during the course of the program. In the example
(left), the length of the program step and the heating
temperature can be altered.
58
The following information is
displayed during the wash
program:
Current program step
Time left for this program
step
Set temperature
Actual temperature
Remaining program time
Drum speed
To terminate a program before it has finished
• Select RAPID ADVANCE and press SELECT.
Advance to ”END OF PROGRAM” and press
SELECT.
• Wait until ”THE DOOR IS OPEN” appears on the
display.
• Now the door can be opened.
Press SELECT.
If required:
Select a function using the
cursor keys.
���������������������
������
�������������������������� �
���������� ��� ���
��������������� �� �
������������������� �� �
��������������� �� ���
����������� ���� ���
�����������
�������������
������
�����������
�������������
�����
����������������
����
�����������������������
������������
�������������
Additional functions during the program
Rapid advance (see section ”To change parameters
in the current program step”)
Rapid advance through the program to the program
step required. Rapid advance can be used to move
both forwards and backwards through the program.
Display weight (see section ”Display weight”)
The actual load weight is shown in large digits on the
display (weight display mode). (On machines with
weighing equipment only.)
No water level reduction (see section ”No water
level reduction”)
Machines with weighing equipment installed adjust
the water level automatically according to the load
weight. This function lets you switch off water level
reduction during the current program.
Pause (see section ”Pause”)
The machine stops. The drain valve remains closed.
Another way to pause the program: Press
a
.
Manual functions (see section ”Manual operation
during a program”)
The following functions can be controlled manually
during the course of the program:
- all water valves, drain and pumps (where
applicable).
- limit highest extraction speed.
- motor on/off after end of wash program.
- flush detergent.
Text (see section ”Text”)
Display description of wash program (if available).
Select a different wash program (see section ”To
change the wash program after program opera-
tion has commenced”)
You can switch to using a different wash program
at any stage during the wash. Once this function
has been selected, the current step (for example,
rinse) of the earlier program will be allowed to
finish and then the new program will start (from
the beginning).
Change temperature scale °C or °F (see section
”To change temperature scale °C/°F”)
Auto restart (see section ”Auto restart”)
Here you enter the number of times you wish the
wash program to restart automatically.