16
Servicing and cleaning the ice
dispenser
When necessary, clean the surfaces of
the dispenser and the ice container
that are accessible from the outside,
using only a soft cloth and warm water.
Never use cleaning agents with a
grinding or aggressive effect.
When necessary, the feeder and the
ice container can be cleaned after
removal of the surfaces accessible
from the outside, using only a soft
cloth and warm water.
Ensure that the ice container is
thoroughly dry before being re-fitted.
If the system is not to be used for a
long period, it is advisable to switch off
the ice machine and water supply,
empty the ice container and fit the
cover supplied over the delivery hole
for ice in the door. When re-starting,
avoid using the ice produced during
the first day.
To change the lamp
The light is switched on automatically
when the door is opened. Before
replacing the light bulb, disconnect the
power plug from the outlet.
Disassemble the lamp by using a
screwdriver in the recess on the lamp
insert.
Assemble a new lamp by guiding it
into a centred position and press until
it snaps.
Use a halogen bulb of the same type,
maximum rating of 20 W.
Defrosting
Defrosting is not necessary.
Every 24 hours, the evaporator is
defrosted automatically.
When the appliance is not in use
Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to
prevent unpleasant smells.
If the cabinet will be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
SOMETHING NOT WORKING
Before contacting your local Service Force Centre check the following point:
Problem
Possible cause / Remedy
" " is displayed in the
temperature display.
Please contact your local Electrolux Service
Force Centre
