3
CONTENTS
Instructions for the User
Important Safety Information
2
Operation
4
Before use
4
Control panel - Use of the freezer
4
Start your appliance
4
Temperature control
4
Quick-freezing5
Freezing fresh food
5
Frozen food storage
5
Thawing5
Making ice cubes
5
Use of the refrigerator-Setting the temperature
6
Fresh food refrigeration
6
Normal operating sounds
6
Movable shelves
7
Positioning the door shelves
7
Hints and Tips
8
Maintenance and Cleaning
9
Internal cleaning9
When the appliance is not in use
9
Changing the light bulb
9
External cleaning9
Defrosting9
Something Not Working
10
Service and Spare Parts
11
Customer Care
11
Guarantee Conditions
12
Instructions for the
Installer
Technical Specification
13
Installation
14
Positioning14
Shelf holders
14
Electrical Connection
15
Door Reversal
16
Disposal of old Appliances
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
18
Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
21 mm
21 mm
ca. 50 mm
90°
90°
ca. 50 mm
Fix cover (Hc) on guide (Ha) until it clips into place
PR33
Hc
Ha
PR167
Ha
Hb
8mm
Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure. .
PR168
Hb
Place the small square on the guide again and fix it
with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
Ha
8mm
K
Remove the brackets and mark a distance of 8 mm
from the outer edge of the door where the nail must
be fitted (K).
