The machine has been designed and manufactured in com-
pliance with:
- Machine directive 2006/42 CEE.
- CEM directive 2004/108 CEE.
- Low voltage directive 2006/95/CEE,
- Machine recycling directive 2002/95/CEE
- directive " WEEE " 2002/96/CEE
The “ ”symbol on the product indicates that this product
should not be considered as household rubbish. Instead, it
should be taken to a recycling area for electric and electronic
equipment. By making sure that the product is correctly dis-
posed of in this way, you are assisting in preventing damage
to the environment and to the health of persons which may
result following uncontrolled disposal of this product. For further
information on recycling this product, please contact the sales
department or the product retailer, the after-sales department
or the waste treatment department in question.
- directive " Waste " 2006/12/CEE
The machine is designed in such a way that it does not contri-
bute, or contributes as little as possible, to increasing the
quantity or noxiousness of waste and the risks of pollution.
Make sure you respect the recycling conditions.
- directive "Packaging and packaging waste "94/62/CEE
The machine packaging is designed in such a way that it
does not contribute, or contributes as little as possible, to
increasing the quantity or noxiousness of waste and the risks
of pollution.
Make sure you eliminate the various parts of the packaging in
the appropriate recycling points.
- To European standards:
EN 6O 204-1-2006 machine electrical equipment.
EN 1678-1998 vegetable slicer, integral safety.
6.
5
ADDRESS FOR SERVICE REQUIREMENTS
We advise you fi rst to contact the dealer who sold you the
machine.
The manufacturer reserves the right to modify and make impro-
vements to its products without notice.
7
TR2S GB 10 2011
Dealer's stamp
Date of purchase: ...............................................
For any requests for information or orders for spare parts,
specify the type of machine, the serial number and the
electrical specifi cations.
Compliance with regulations
This compliance is certifi ed by:
- The CE conformity mark, affi xed on the machine,
- The relevant CE declaration of conformity, associated with the
warranty.
- This instruction manual, which must be given to the opera-
tor.
Acoustic specifi cations:
- The acoustic pressure level measured in accordance with the
test code EN ISO 3744 and EN ISO 11201 is 73 dBA under
the conditions specifi ed in standard EN 1678 : 1998 (use of
a fi ne grater for processing raw, unpeeled potatoes). When
empty the level is < 70 dBA.
Protection indices according to the standard EN 60529-
2000:
- IP55 electrical controls
- IP24 overall machine
Integral safety:
- The machine has been designed and manufactured respecting
the regulations and standards relating to it indicated above.
- The operator must be trained before using the machine and
informed of any residual risks.
Food hygiene:
The machine is made from materials that conform to the following
regulations and standards:
- Directive 1935/2004/CEE: materials and objects in contact
with foodstuffs,
- Standards EN 601-2004: cast aluminium alloys in contact with
foodstuffs.
- Directive EN 1672-2-2005 : Prescriptions relating to hygiene
The surfaces of the food area are smooth and easy to clean. Use
detergents that are approved for food hygiene and respect the
instructions for their use.
Vibration
The maximum level of vibration measured on the handle during
use is: <2.5 m/s²
