background image

Problem 

1)

Possible cause

Remedy

Drying cycle too
short.

Load size is small.

Select time program. The time val-
ue must be related to the load. To
dry 1 item or a small amount of
laundry we recommend short dry-
ing times.

The laundry is too dry.

Select time program or higher dry-
ness level (e.g. 

 

extra dry (Extra-

trocken))

Drying cycle too
long 

6)

The filter is clogged.

Clean the filter.

The load is too large.

Do not exceed the maximum load
size.

The laundry was not spun suffi-
ciently.

Spin the laundry well.

Too low or too high room temper-
ature - this is not the appliance
malfunction.

Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach-
ieve best drying results is between
19°-24°C.

1) 

If there is an error message on the display (e.g. 

E51

): Turn the tumble dryer off and on. Select a new

program. Push the Start/Pause button. If the appliance does not operate contact the service centre and
provide the error code.

2) 

Follow the program description — see PROGRAMS chapter

3) 

See chapter CARE AND CLEANING

4) 

Only dryers with Dryness (Trockengrad) option

5) 

See HINTS AND TIPS chapter

6) 

Note: After a maximum of 5 hours the drying cycle ends automatically.

12. 

TECHNICAL DATA

Height x Width x Depth

850 x 600 x 630 mm (maximal 640 mm)

Max. depth with the appliance door open

1100 mm

Max. width with the appliance door open

950 mm

Adjustable height

850 mm (+ 15 mm - feet regulation)

Drum volume

118 l

Maximum load volume

8

 kg

Voltage

230 V

Frequency

50 Hz

Total power

900 W

www.aeg.com

20

Summary of Contents for TP5080TW



















Reviews: