B3300 Series
B3300 Series
MAINTENANCE
REPLACING THE DUSTBAG
Ø
Always operate the cleaner with the dustbag installed.
Ø
If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not
close completely.
Ø
After removing the flexible hose, open the front cover using the compartment open button.
(fig. 18)
Ø
Rotate the support of the bag to the vertical position.
Ø
Remove the dustbag and insert a new one.
(fig. 19)
Ø
Close the cover by pressing down until it clicks.
(fig. 18)
Ø
The dustbag reference number is
U59
BLOCKED AIRFLOW AND DIRTY FILTERS
Ø
The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters
are blocked with dirt.
Ø
Disconnect from mains and allow the cleaner to cool for 45-60 minutes. Remove blockage
and/or replace filters.
Ø
Restart the cleaner.
CLEANING/REPLACING THE FILTERS
Ø
The dustbag must be replaced if the window of the dustbag full indicator is illuminated.
Ø
Filters should be replaced at least twice a year or when they become visibly soiled.
Ø
Always operate the cleaners with filters installed to avoid reduced suction.
Ø
Disconnect from electrical outlet before cleaning filters.
Cleaning the motor filter
Ø
Pull dustbag upward and remove the motor protection filter.
(fig. 20)
Ø
Rinse the filter under tap water and dry it completely.
(fig.23)
Ø
Put the filter back into the cleaner and close the cover.
(fig.20)
Cleaning the exhaust filter
Ø
Open the filter grill and remove the exhaust filter.
(fig.21, fig.22)
Ø
Rinse the filter under tap water and dry it completely.
(fig.23)
Ø
Put the filter back into the cleaner and close the filter grill.
(fig.22, fig.21)
