background image

38

Im

Im

por

por

t

t

ant saf

ant saf

et

et

y inf

y inf

ormation

ormation

General safety precautions

Keep these instructions and they should remain at
the appliance when moving away or changing
owner.

This appliance is designed for storing food,
domestic use and being used according to these
instructions only.

Specialised companies that are qualified to do
so by the manufacturer must carry out service
and repairs including repairing and changing
the power cord.

Accessory parts supplied by

them should be used only for repairing. Otherwise
the appliance can be damaged or can cause other
damage or injury.

The appliance is out of circuit only in that case if the
plug is removed from the socket. Before cleaning
and maintenance always unplug it (do not get it by
the cable). If the socket is difficult to reach, switch
off the appliance by cutting off the current.

Power cord must not be lengthened.

Make sure that the power plug is not squashed
or damaged by the back of the fridge/freezer.

- A damaged power plug may overheat and cause a

fire.

Do not place heavy articles or the fridge/freezer
itself on the power cord.

-

There is a risk of a short circuit and fire.

Do not remove the power cord by pulling on its
lead, particularly when the fridge/freezer is
being pulled out of its niche.

- Damage to the cord may cause a short-circuit, fire

and/or electric shock.

- If the power cord is damaged, it must be replaced

by a certified service agent or  qualified service
personnel.

If the power plug socket is loose, do not insert
the power plug.

- There is a risk of electric shock or fire.

When cleaning, defrosting, taking out frozen food
or ice tray do not use sharp, pointed or hard
devices, as they can cause damage to the
appliance.

Be careful not to allow liquids to the temperature
control.

Ice and ice-cream can cause hurt if they are eaten
immediately after removal from the frozen food
compartment.

After dissolving frozen food must not be refrozen, it
must be used up as soon as possible.

Store pre-packed frozen food in accordance with
the frozen food manufacturer's instructions.

You must not make defrosting faster with any
electric heating appliance or chemicals.

Do not put hot pot to the plastic parts of the freezer.

Safety precautions for
installation

Put the appliance to the wall to avoid touching or
catching warm parts (compressor, condenser) to
prevent possible burn.
When moving the appliance take care of the plug
not to be in the socket.
When placing the appliance take care not to stand
it on the power cord.
Adequate air circulation should be around the
appliance, lacking this leads to overheating. To
achieve sufficient ventilation follow the instructions
relevant to installation.
If the appliance is not placed on floor level,
provide appropriate fixing (e. g. using sucking
disks).

See chapter "Placement".

Safety precautions for
isobutane

Warning

The refrigerant of the appliance is isobutane
(R600a) that is inflammable and explosive to a
greater extent.

Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.

Do not use mechanical devices or other means
to accelerate the defrosting process, other than
those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food
storage compartments of the appliance, unless
they are of the type recommended by the
manufacturer.

For the safety of life and property keep
the precautions of these user's

instructions as the manufacturer is not
responsible for damages caused by omission.

GB

Do not store flammable gas and liquid in the
appliance, because they may explode.

Do not store carbonated drinks, bottled drinks
and bottled fruits in the freezer

Precautions for child safety

Do not allow children to play with the packaging
of the appliance. Plastic foil can cause
suffocation.

Adults must handle the appliance. Do not allow
children to play with it or its controlling parts.

If you are discarding the appliance pull the plug
out of the socket, cut the connection cable (as
close to the appliance as you can) and remove
the door to prevent playing children to suffer
electric shock or to close themselves into it.

Summary of Contents for TG 050















Reviews: