Electrolux TAL1E100, User Manual

Page: 27 / 32

safety cut-outs with which the machine
is fitted may operate.
When operating the tumble dryer, the
room temperature must not be lower
than +5°C and higher than +35°C, as it
may affect the performance of the
appliance.
Stacking kit
A special stacking kit is available through
your dealer, to enable the mounting of
the dyer on top of a front loading
washing machine with cover’s depth
between 48 and 60 cm.
Read carefully the instructions supplied
with the kit.
Door reversal
To make it easier to load or unload the
laundry the door can be reversed.
This operation must be carried out by
qualified personnel.
Please contact the nearest Service
Centre.
P1107
Electrical connection
This machine is designed to operate on
a 220-230 V,
single-phase, 50 Hz supply. Check that
your domestic electrical installation can
take the maximum load required, also
taking into account any other appliances
in use.
Connect the machine to an earthed
socket, in accordance with current
wiring regulations.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the
above safety precaution. Should
the appliance power supply cable
need to be replaced, this must be
carried out by our Service Centre.
Important!
The power supply cable must be
accessible after installing the machine.
GB
installation electrolux 27