Problem
Possible cause
Solution
Many products are stored at
the same time.
Store less products at the
same time.
Products are too near to
each other.
Store products so that there is
cold air circulation.
There is too much
frost.
Food is not wrapped correct-
ly.
Wrap the food correctly.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The temperature regulator is
not set correctly.
Set a higher temperature.
The buzzer
sounds. The
Alarm icon flash-
ing.
The door is not closed cor-
rectly.
Refer to "Door open alarm".
dEMo appears on
the display.
The appliance is in demon-
stration mode.
Keep pressed approximately
10 sec the OK button since a
long sound of buzzer is heard
and the display shut off for a
short while: appliance start
works regularly.
upper or lower
square is shown
in the tempera-
ture display.
An error has occurred in
measuring the temperature.
Call your service representa-
tive (the cooling system will
continue to keep food prod-
ucts cold, but temperature ad-
justment will not be possible).
CLOSING THE DOOR
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to
"Installation".
3.
If necessary, replace the defective door
gaskets. Contact the Service Center.
ENGLISH
13