Problem
Possible cause
Solution
The product temperature is
too high.
Let the product temperature
decrease to room tempera-
ture before storage.
Many products are stored at
the same time.
Store less products at the
same time.
Products are too near to
each other.
Store products so that there
is cold air circulation.
There is too
much frost.
Food is not wrapped cor-
rectly.
Wrap the food correctly.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The temperature regulator is
not set correctly.
Set a higher temperature.
The buzzer
sounds. The
Alarm icon flash-
ing.
The door is not closed cor-
rectly.
Refer to "Door open alarm".
dEMo appears
on the display.
The appliance is in demon-
stration mode.
Keep pressed approximately
10 sec the OK button since a
long sound of buzzer is heard
and the display shut off for a
short while: appliance start
works regularly.
upper or lower
square is shown
in the tempera-
ture display.
An error has occurred in
measuring the temperature.
Call your service representa-
tive (the cooling system will
continue to keep food prod-
ucts cold, but temperature
adjustment will not be possi-
ble).
7.1
Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to
"Installation".
3.
If necessary, replace the defective
door gaskets. Contact the Service
Center.
8.
INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
8.1
Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
ENGLISH
11
