23
Appliance cools too much.
Temperature is set too cold.
Turn the temperature regula-
tor to a warmer setting tem-
porarily..
Malfunction
Possible Cause
Remedy
Heavy build up of frost, possi-
bly also on the door seal.
Door seal is not air tight (pos-
sibly after changing over the
hinges).
Carefully warm the leaking
sections of the door seal with
a hair dryer (not hotter than
approx. 50 °C). At the same
time shape the warmed door
seal by hand such that it sits
correctly.
Unusual noises.
The appliance is touching the
wall or other objects.
Appliance is not level.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
If necessary, carefully bend
the component out of the
way.
Move the appliance slightly.
Readjust the feet.
If the door remains open for
more than 7 min., the light
will be switched off by the
electronics.
This is normal, no error has
occurred.
Close the door and re-open it,
the light will function auto-
matically again.
