![Electrolux OKO-SANTO 1554-6 iU Operating And Installation Instructions Download Page 20](http://html.mh-extra.com/html/electrolux/oko-santo-1554-6-iu/oko-santo-1554-6-iu_operating-and-installation-instructions_2383747020.webp)
20
• Do not leave the door open any longer than necessary.
• Do not set temperature any colder than necessary.
• Put frozen food in the fridge to defrost. The cold in the frozen food
will then be used to cool the fridge.
What to do if ...
Correcting Malfunctions
Spare parts:
The following spare parts can be ordered from your local AEG Service
Force Centre. You can fit these yourself without any special skill or
training, e.g.:
– butter/cheese compartment,
– egg holders,
– door racks,
– fruit and vegetable drawers,
– storage racks
A malfunction may be caused by only a minor fault that you can recti-
fy yourself using the following instructions. Do not perform any other
work on the appliance if the following information does not provide
assistance in your specific case.
Important!
Repairs to refrigerators/freezers may only be performed by
competent service engineers. Improper repairs can give rise to signifi-
cant hazards for the user. If your appliance needs repairing, please
contact your specialist dealer or your local Service Force Centre.
Symptom
Possible Cause
Remedy
Appliance does not work.
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is
defective
Socket is defective.
Mains malfunctions are to
be corrected by an
electrician.
Switch on the appliance.
Insert mains plug.
Check fuse, replace if nec-
essary.
Temperature is set too
cold.
Turn the thermostat knob
to a warmer setting tem-
porarily.
The compressor runs con-
tinuously.
Summary of Contents for OKO-SANTO 1554-6 iU
Page 1: ...ÖKO SANTO 1554 6 iU Built In Refrigerator Operating and Installation Instructions ...
Page 9: ...9 To reverse the opening direction of the door proceed as shown in the figures ...
Page 11: ...11 Mounting furniture door ...
Page 12: ...12 Screw appliance into place Place the covering strip ...