Electrolux MKR62FWTWB, Use & Care Manual

Page: 7 / 34

7
loading and using the dryer
Always follow the manufacturer care tag for the fabric when you wash and dry clothing.
advice for sorting and loading clothing
As a general rule, if the clothing is appropriately sorted for the washer, it is
appropriately sorted for the dryer as well. Do not add fabric softener sheets once
the load of clothing has begun to warm. They can cause stains.
Do not overload the dryer. This will waste energy and cause wrinkles. Do not dry
the following articles: Articles made of fiberglass, wool, those covered in rubber,
plastics, with plastic trims or parts, or those filled with foam.
This function is activated only in the automatic cycles (COTTONS, PERMANENT
PRESS and DELICATES).
The Dryness Sensor provides greater accuracy in the drying process than in standard
machines, resulting in shorter dry times and better care of the garments.
While the clothing spins in the drum, it touches the Dryness Sensor.
The sensor stops the heat cycle as soon as the clothing has reached the dryness level;
it will stop regardless of the cycle and/or time selected, thereby saving energy.
ís
models with sensor dry
models with led lights
The drum light is LED.
It must be replaced by a qualified technician.
models with light bulb
Before replacing the bulb of the rotating drum,
make sure to disconnect the dryer from the power
outlet or to disconnect the dryer from your house’s
power distribution panel, removing the fuse or
breaking the electrical circuit.
Place your hand on the top of the dryer opening from inside the drum.
Remove the bulb and replace it with another of the same size.