Electrolux LKR540200W, User Manual

Page: 25 / 32

The back lamp
1. Turn the lamp glass cover to remove
it.
2. Clean the glass cover.
3. Replace the lamp with a suitable
300 °C heat-resistant lamp.
4. Install the glass cover.
14. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
14.1 What to do if...
Problem Possible cause Remedy
You cannot activate the
appliance.
The appliance is not con‐
nected to an electrical sup‐
ply or it is connected incor‐
rectly.
Check if the appliance is
correctly connected to the
electrical supply.
The fuse is blown. Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
You cannot activate or op‐
erate the hob.
The fuse is blown. Activate the hob again and
set the heat setting in less
than 10 seconds.
Residual heat indicator
does not come on.
The zone is not hot be‐
cause it operated only for a
short time.
If the zone operated suffi‐
ciently long to be hot,
speak to an Authorised
Service Centre.
You cannot activate the
outer ring.
Activate the inner ring first.
The oven does not heat
up.
The oven is deactivated. Activate the oven.
The necessary settings are
not set.
Make sure that the settings
are correct.
The clock is not set. Set the clock.
The lamp does not oper‐
ate.
The lamp is defective. Replace the lamp.
Steam and condensation
settle on the food and in
the cavity of the oven.
You left the dish in the
oven for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
It takes too long to cook
the dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the ad‐
vice in the user manual.
ENGLISH 25