Charcoal filter
The time of saturation of the charcoal filter varies depending on the
type of cooking and the regularity of cleaning the grease filter. The
activated charcoal filter is not washable, cannot be regenerated
and must be replaced approximately every 4/6 months of operation,
or more frequently for particularly heavy usage.
6.2 Cleaning the grease filter
Filters are mounted with the use of clips
and pins on the opposite side.
To clean the filter:
1. Press the handle of the mounting clip
on the filter panel underneath the
hood (1).
1
2
2. Slightly tilt the front of the filter
downwards (2), then pull.
Repeat the first two steps for all filters.
3. Clean the filters using a sponge with
non abrasive detergents or in a
dishwasher.
The dishwasher must be set
to a low temperature and a
short cycle. The grease filter
may discolour, it has no
influence on the
performance of the
appliance.
4. To mount the filters back follow the
first two steps in reverse order.
Repeat the steps for all filters if
applicable.
6.3 Replacing the charcoal filter
WARNING!
The charcoal filter is NON-
washable! The filter cannot
be regenerated!
To replace the charcoal filter:
1. Remove the grease filters from the
appliance.
Refer to "Cleaning the grease filter" in
this chapter.
2. Turn the filter counterclockwise (1)
and then pull (2).
1
2
To mount the filters back follow the steps
in reverse order.
In any case, it is necessary to replace
the filters at least every four months.
6.4 Replacing the lamp
WARNING!
Risk of burns and electric
shock! Disconnect the
appliance from the electricity
before the operation! Make
sure that the light bulb has
cooled down before touching
it.
WARNING!
Risk of injury! Use protective
gloves to replace the lamp.
Risk of damage to the
appliance! Do not use sharp
edged tools!
Replace the burnt light bulb in
accordance with the specifications:
Power (W)
4
Socket
E14
www.electrolux.com
10
