manualshive.com logo in svg

Electrolux LAVAMAT 70030, Service Manual

Share
Download
Electrolux LAVAMAT 70030 Service Manual Download Page 14

- 14 -

TSE-N 01.2000 R.K.

599 50 07-53/0

3.  Option buttons / display

3.8  Electronik cycle display

-

indicates the selected programe steps

-

indicates  the actual steps during the programe

-

indicates the end of programe

-

indicates at the end of programe „Overdosage“
that means to much detergent is used. The LED is only illuminated if
foam is detected during the first intermidiate spin.
Its active in all programes.

-

indicates fault codes

- This is a magneto - dynamic doorlock
- You have to open the door with the handle, which is not depending on the power source.
- Emergency opening with the knob on the base panel.

3.9  The intelligent doorlock

3.10

Door locking conditions

If the door is closed and the machine started, the door is locked in any case.
If you push the break button the locking condition decide, if the machine can be opened.
The LED illuminates according to the locking conditions.

1.

Niveau

2.

water temperature 

³

 60°C

3.

Drum speed

4.

Broken tacho generator

Before start- door is open

Green

Door is open

Red „blinking“

Start button is pressed, while the
door is open.
Until E40 is shown.

Before start – door
closed

Grenn

Door can be opened with the handle

After start – door closed

Green

Door will be locked and LED stays
green

After the end of program

Green

Door is unlocked and can be opened
with the handle.

Green

Door is open

During the program cycle Off

Door is locked due to level and
temperature

Summary of Contents for LAVAMAT 70030









































Reviews:

No comments

Brands by name

Popular brands

Load more brands