Electrolux KOCGS30TX, User Manual, Page: 21 / 140

12.3 How to use: Aqua Clean
This cleaning procedure uses humidity to
remove remaining fat and food particles from
the oven.
Step 1 Pour water into the cavity embossment:
200 ml.
Step 2
Set the function: .
Step 3 Set the temperature to 90 °C.
Step 4 Let the oven work for 30 min.
Step 5 Turn off the oven.
Step 6 Wait until the oven is cold. Dry the cavi‐
ty with a soft cloth.
12.4 How to clean: Water tank
Step 1 Turn off the oven.
Step 2 Place a deep pan below the steam inlet.
Step 3 Pour water into the water drawer: 850 ml. Add citric acid: 5 teaspoons. Wait for 60 min.
Step 4 Turn on the oven and set the function: True Fan + Steam. Set the temperature to 230 °C. Turn off
the oven after 25 min and wait until it is cold.
Step 5 Turn on the oven and set the function: True Fan + Steam. Set the temperature between 130 and
230 °C. Turn off the oven after 10 minutes and wait until it is cold.
To prevent limestone residue empty the water tank after each steam cooking.
When the cleaning ends:
Turn off the oven. Empty the water tank.
Refer to Daily use,
"Emptying the water
tank" chapter.
Rinse the water tank and clean
the remaining limestone residue
with a soft cloth.
Clean the drain pipe with
warm water and a mild
detergent.
The table below shows water hardness range (dH) with the corresponding level of calcium
deposit and the quality of water. When water hardness exceeds level 4, fill the water drawer
with bottled water.
Water hardness Test strip Calcium deposit
(mg/l)
Water classi‐
fication
Clean the wa‐
ter tank every
Level dH
1 0 - 7 0 - 50 soft 75 cycles - 2.5
months
2 8 - 14 51 - 100 moderately hard 50 cycles - 2
months
3 15 - 21 101 - 150 hard 40 cycles - 1.5
months
4 22 - 28 over 151 very hard 30 cycles - 1
month
ENGLISH 21