background image

3

PRODUCT REGISTRATION INFORMATION

The package containing this manual also includes your product registration 

information. Warranty coverage begins at the time your Electrolux vent hood was 

purchased.
If you received a damaged product, immediately contact your dealer or builder. Do 

not install or use a damaged appliance.

Please record the purchase date of your Electrolux unit and your dealer’s name, 

address and telephone number.

________________________________________________ 

Purchase Date
________________________________________________ 

Electrolux Model Number
________________________________________________ 

Electrolux Serial Number
________________________________________________ 

Dealer Name
________________________________________________ 

Dealer Address
________________________________________________ 

Dealer Telephone

Keep this manual and the sales receipt together in a safe place for further 

reference.

QUESTIONS?

For toll-free telephone support in the U.S. and Canada: 

1-877- 4ELECTROLUX (1-877-435-3287)

 

For online support and Internet product information: 

www.electroluxusa.com

Finding Information

NOTE

Registering your product with Electrolux enhances our ability to serve you. You can register 

online (at the Internet address below) or by dropping your Product Registration Card in the 

mail. Complete and mail the Product Registration Card as soon as possible to validate the 

registration date. 

Summary of Contents for Icon E36WC45FSS

























Reviews: