MOUNTING INSTRUCTIONS
Mount the hood as shown in the mounting instruction booklet.
WARNING!
The fixing material (screws/plugs) that are delivered with the hood are
suitable only for solid concrete ceilings and walls. The person who is mounting the
hood should make sure that the fixing elements delivered with the hoods are right and
suitable for the walls and ceiling he finds. The manufacturer declines any
responsibility for damages caused by incorrect mounting.
DISMANTLING AND RE-POSITIONING OF THE GREASE FILTERS
Switch the lights off and wait till they have completely cooled down.
Follow the steps as shown in Figures.
To dismantle the grease filter press the handle and, pull it downwards.
To re-position the grease filter insert them oblique in the opening, lift them in the front side and
then fix them in the back side.
FITTING AND REMOVAL OF EVENTUAL CARBON FILTERS
If you wish to use the hood as a filtering hood, it is necessary to fit the carbon filters.
The carbon filters ARE OPTIONAL, and can be bought separately.
2 kinds of carbon filters are available:
•
LONG LIFE
Carbon filters that
can be regenerated.
The instructions are given with the
filters.
•
Standard Carbon filters that
cannot be regenerated
. The instructions you find in Figures
C.
GENERAL WARNING
The pipe must be heat, flame and corrosionproof. The producer strongly advises against the
use of reducers or pipes with smaller diameter to the hood outlet pipe. Also flexible aluminium
pipes are not recommended because performance is strongly diminished.
The end part of the pipe, on the outside of the hole on the wall, must be of such a shape to
avoid rain, gusts of wind or other foreign bodies getting into the pipe.
Should there be any doubt, contact anyone specialising in the installation of gas or ventilation
system.
34
