To remove and clean the spray arms
At regular intervals make sure that the
nozzles in the spray arms are not
blocked.
Clean the nozzles with a piece of wire or
a needle under running water.
Caution!
Clean the nozzles openings
carefully to prevent damage.
To remove and clean the top spray arm
1. Turn the fixing screw (A) counterclock-
wise.
2. Pull the top spray arm off the shaft.
3. Clean the top spray arm and the fixing
screw.
4. Put the top spray arm in position and turn
the fixing screw clockwise.
To remove and clean the upper spray arm
1. To remove the upper spray arm, turn it
laterally.
2. Clean the upper spray arm.
3. To install again the upper spray arm, put
it in position and press.
To remove and clean the lower spray arm
1. Turn the fixing screw (B) counterclock-
wise.
2. Pull the lower spray arm off the shaft.
3. Clean the lower spray arm and the fixing
screw.
4. Put the lower spray arm in position and
turn the fixing screw clockwise.
What to do if…
The appliance does not start or stops during
operation.
First try to find a solution to the problem (refer
to the chart). If not, contact the service cen-
tre.
Malfunction
Fault code
Possible cause
Possible solution
The appliance does not
fill with water.
• An audible signal op-
erates.
• The display shows
the message OPEN
THE TAP.
The water tap is closed. Open the water tap.
electrolux
39
