Menu
Submenu
Description of the option
Option guide
The display shows information
about the options.
Demo mode
On
Off
Refer to ‘ Demo mode ’.
Back
To go back to the menu op-
tion.
MULTITAB
Activate or deactivate the multitab
option before the start of a pro-
gramme. You cannot activate or
deactivate this option while a pro-
gramme operates.
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse aid
and salt. The related indicators are off.
The programme duration can increase.
1.
Open the menu option.
2.
Go to
Multitab
and activate the option.
3.
Press
OK
to confirm.
4.
Press the display touchpad to close the
menu option.
The option stays on until you deactivate it.
Go to menu option and deactivate the mul-
titab option.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1.
Deactivate the multitab option.
2.
Set the water softener to the highest
level.
3.
Make sure that the salt container and
the rinse aid dispenser are full.
4.
Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5.
Adjust the water softener to the water
hardness in your area.
6.
Adjust the released quantity of rinse aid.
DEMO MODE
With this option you can simulate a pro-
gramme.
Factory setting: off.
1.
Open the menu option.
2.
Go to
Demo mode
and activate the
option. The option is active when you
see
DEMO
in upper left corner of the
display.
Deactivate the
Demo mode
if you
want to use the appliance.
ENGLISH
71