41
Before You Call
Water/Moisture/Frost Inside Refrigerator
Concern
Cause
Solution
Moisture collects on
inside of refrigerator
walls.
•
Weather is hot and
humid.
•
Door is slightly open.
•
Door is opened too
often or too long.
•
Open containers.
•
The rate of frost buildup and internal
sweating increases.
•
See Problem section, Opening/Closing
of Doors/Drawers.
•
Open door less often to allow internal
temperature to stabilize.
•
Keep containers covered.
Water collects on
bottom side of
drawer cover.
•
Vegetables contain
and give off moisture.
•
Moisture on the bottom side of the
cover is not unusual.
•
Move humidity control (some models)
to lower setting.
Moisture collects in
bottom of drawer.
•
Washed vegetables
and fruit drain while in
the drawer.
•
Fruits and vegetables
are kept past their
prime
•
Dry items before putting them in the
drawer. Water collecting in bottom of
drawer is normal.
•
Routinely clean out old fruits and
vegetables especially if they begin to
break down.
Moisture collects
on outside of
refrigerator or
between doors.
•
Weather is humid.
•
Door is slightly open,
causing cold air from
inside refrigerator to
meet warm air from
outside.
•
This is normal in humid weather. When
humidity is lower, the moisture should
disappear.
•
See Problem section, Opening/Closing
of Doors/Drawers.
Perfect Temp
TM
Drawer (some models)
Concern
Cause
Solution
Display does not
illuminate or shows
“CE”.
•
Connector not
connected or loose.
•
Remove pan and insure connector is
fully engaged. (See Storage Features
section)
Display shows
“LOC” when buttons
are pressed.
•
Drawer in control lock
mode.
•
Press and hold control lock button
for three seconds to take drawer out
of control lock mode. (See Storage
Features section)
