Prior to using for the first time
16
Setting the amount of rinse aid required
3
Only change the amount dispensed, if smears, milky spots (reduce the amount)
or dried on water spots (increase the amount) can be seen on glasses and dishes.
(See section “If dishwashing results are not satisfactory”.) The dosage can be set
from 16. The dosage is preset to “4” in the factory.
1.
Open the dishwasher door.
2.
Press the release button on the rinse aid
compartment.
3.
Open the cover.
4.
Set the dosage level.
5.
Press the lid shut until it clicks into place.
6.
If rinse aid has leaked out, wipe it away
with a cloth.
Setting the acoustic signal
In addition to the optical display (e.g. indicating the end of the cycle, errors) you
can also choose to set an acoustic signal.
1.
Press the ON/OFF button.
3
If the name of a programme stage is displayed in the display, a dishwashing cy
cle is active. First of all you must abort the dishwashing cycle:
–
Press the RESET button. CONFIRM CANCEL? appears in the display.
–
Press the OK/START button. This cancels the dishwashing cycle.
2.
Go to the SOUND VOLUME setting; see the section “Adapting an option/setting”.
3.
Set the value for the sound volume.
You can set a value from 0 to 5. At 5 the acoustic signals are very loud, at 0 no
acoustic signals are emitted; in addition the symbol
is lit in the display.
