Water hardness
Adjusting the water hardness
setting
Use of salt
°dH
°TH
mmol/l
manually
electronically
4 - 10
7 - 18
0,7 - 1,8
1
level 2
yes
< 4
< 7
< 0,7
1
level 1
no
Setting manually
The dishwasher is factory set at position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the dish
-
washer.
3. Turn the water hardness dial to position 1
or 2 (see table).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
1. Press the On/Off button. The dishwasher must be in setting mode.
2. Press simultaneously and keep pressed buttons
B
and
C
, until the lights of buttons
A
,
B
and
C
start flashing.
3. Press button
A
, the lights of buttons
B
and
C
turn off while the light of button
A
goes
on flashing. In the digital display is visible the current level.
Examples:
displayed = level 5
displayed = level 10
4. To change the level, press button
A
. Each time the button is pressed the level changes
(for the selection of the new level see the chart).
Examples:
if the current level is 5, by pressing button
A
once, level 6 is selected. if the
current level is 10, by pressing button
A
once, level 1 is selected.
5. To memorise the operation, switch off the dishwasher by pressing the On/Off button.
8
Set the water softener
Summary of Contents for FAVORIT 88020I
Page 1: ...FAVORIT 88020I User manual Dishwasher ...
Page 31: ...31 ...
