manualshive.com logo in svg

Electrolux FAVORIT 55010 VIL, User Manual

Share
Download
Electrolux FAVORIT 55010 VIL User Manual Download Page 9

Function buttons

The following functions can be set with the help of these buttons:
• setting of the water softener,
• cancel a washing programme or a delay start in progress,
• activation/deactivation of Multi-tab function
• activation/deactivation of the rinse aid dispenser when Multi-tab function is

active,

• activation/deactivation of the audible signals.

Setting mode

The appliance is in setting mode when 

all

 programme lights are illuminated and

in the display 3 horizontal lines are visible.

Always remember that when performing operations such as:
• selecting a washing programme
• setting the water softener
• activating/deactivating the MULTITAB function
• activating/deactivating the rinse aid dispenser
• activating/deactivating the audible signals
the appliance 

MUST

 be in setting mode.

If a programme light is illuminated and in the display 1 horizontal line is visible,
the last performed programme is still set.
In this case, to return to setting mode, the programme has to be cancelled.

To cancel a set programme or a programme in progress

: Simultaneously press

and hold the two RESET buttons (B and C) until all the programme button lights
illuminate. The programme has been cancelled and the machine is now in setting
mode.

Control panel

9

Summary of Contents for FAVORIT 55010 VIL









































Reviews:

No comments

Brands by name

Popular brands

Load more brands