manualshive.com logo in svg

Electrolux FAVORIT 40730, User Instructions

Share
Download
Electrolux FAVORIT 40730 User Instructions Download Page 11

Operating Instructions

11

Adjust the water softener to the water hardness setting for your area 
as shown in the table.

1 

It is only possible to adjust the water hardness setting when no pro-
gramme is running. If you have accidentally started a programme (a 
LED stays on permanently), the programme must be stopped by press-
ing the appropriate button.

0 

1.

The dishwasher must be switched off.

2. Manual setting:

Open the door on the dishwasher.

3.

Remove the lower rack from the 
dishwasher.

4.

Turn the water hardness switch 
to 0 or  1.

5.

Re-position the lower rack.

6. Electronic setting:

Press the softener and function but-
tons simultaneously and keep them 
pressed.

7.

In addition press the ON/OFF button.

8.

The LED indicators for the water softener and function buttons flash.

9.

Press the softener button again.
– At first the LED indicator for the water softener button will light up 

continuously for 5 seconds and then begin to flash.

– The number of flashes corresponds to the hardness setting.
– The sequence of flashes is repeated several times after a 5 second 

pause.

10.

Each time you press the water-softener button the hardness setting 
will go up by 1.
(Exception: Hardness setting 1 follows hardness setting 5).
– If the hardness setting is changed, the LED indicator for the water-

softener button will confirm the change by remaining illuminated 
continuously for 5 seconds and then flashing again.

– The number of flashes corresponds to the new hardness setting.
– The sequence of flashes is repeated several times after a 5 second 

pause.

11.

Once the hardness setting is correctly adjusted, press the ON/OFF but-
ton. 
The hardness setting is then stored.

Summary of Contents for FAVORIT 40730

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands