8
www.electrolux.com
SAFETY ADVICE
Read the following instruction carefully before using the appliance for the first time.
• This appliance shall not be used by children. Keep the appliance and its cord out of
reach of children. Appliances can be used by persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and if they
understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• The appliance may only be connected to a power supply whose voltage and
frequency comply with the specifications on the rating plate!
• Never use or pick up the appliance if
– the supply cord is damaged,
– the housing is damaged.
• If the appliance or the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person, in order to avoid hazard.
• Always place the appliance on a flat, level surface.
• Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling or cleaning.
• Never touch the blades or inserts with your hand or any tools while the appliance is
plugged in.
• The blades and inserts are very sharp! Danger of injury!
•
Do not immerse the appliance in water or any other liquid.
• Do not exceed the maximum filling volume as indicated on the appliances.
• Never process boiling liquids (max 90 °C).
• Do not use this appliance to stir paint. Danger, could result in an explosion!
• Never operate appliance without lid.
• Do not let the power cord touch hot surfaces or hang over edge of table or counter.
• Never use accessories or parts made by other manufactures not recommended or
sold; may cause a risk of injury to persons.
• Do not grind hard or dry substances in the jug.
• Keep hands and utensils out of the blender during operation to reduce the risk of
severe injury to persons or damage to the blender.
• Ensure that the blender is switched off before removing it from the stand.
• Do not attempt to remove the blade assembly.
• Care shall be taken when handling the sharp cutting blades, emptying the bowl and
during cleaning.
• Be careful if hot liquid is poured into the appliance as it can be ejected out of the
appliance due to a sudden steaming.
• Switch off the appliance and disconnect from supply before approaching parts that
move in use.
