Electrolux EXM12HJESI, User Manual

Page: 9 / 80

9 ENGLISH
AUTO
AUTO
COOL
HIGH
DRY
LOW
HEAT FAN
MEDIUM
3D SWING BUTTON
(OPTIONAL)
Press this button, the louver will swing up/
down and left/right automatically. Press
again to cancel it.
Short press button will activate up/
down swing. And long 1 senconds
press will activiate left/right swing.
MODE BUTTON
Press the button to set the operation
mode: AUTO, DRY, FAN, COOL and
HEAT. Default setting: AUTO.
• For Cooling only models, there is
no HEAT mode available.
• In AUTO mode, user can still set
desired temperature.
TIMER ON/OFF Button
Press the button to set the timer function
for switching on/off the unit. If the TIMER
ON/OFF symbol ” ” or ” ”blinks,
press the UP or DOWN button to set the
time. Keep the button pressed for two
seconds to accelerate the process. Press
the button to set the timer. Default setting:
-:-- (24-hour mode). Press the button
again for 2 seconds to cancel the timer
function.
X-FAN BUTTON
In COOL or DRY mode, press the button
to enable or disable the X-FAN function.
Default setting: OFF.
ECO BUTTON
In COOL or HEAT mode, press this button
to enable or disable Eco operation. If the
ECO function is enabled, the ECO symbol
” ” will be shown. Default setting: OFF.
This is ideal for the users to use while
sleeping.
TEMP BUTTON
Press this button to change the Indoor
Unit temperature Display between Set
temperature and Room temperature.
After display Room temperature 5s, it
will turn into set temperature. Remote
controller display will always display Set
temperature.
When the symbol ” ” is shown, the indoor
unit displays the Set temperature.
When the symbol ”
” is shown, the indoor
unit displays the Room temperature.
For models without Temp button,
to enabled Temp funtion you need
press I Feel and Down buttons at
the same time.
HEALTH BUTTON (OPTIONAL)
Press the button to enable or disable the
operation of the health filter. If the HEALTH
function is enabled, the HEALTH symbol
”
” will be shown.
UP/DOWN BUTTON
Press the button to increase/decrease the
temperature. Keep the button pressed for
two seconds to accelerate the process.
Release the button to set the temperature
and the °C/°F icon will be displayed
constantly.
Temperature range: 16-30 °C (60-86 °F).
In Timer-On/Off or Clock functions,
use the button to set the clock or timer
adjustment.
FAN SPEED BUTTON
Press the button to set the fan speed:
AUTO, LOW, MEDIUM and HIGH. Default
setting: AUTO. In the AUTO and DRY
mode, fan speed can not be set.
LIGHT BUTTON
Press the button to switch the display of
the indoor unit on or off. When switch on,
will have “beep” sound.
Default setting: OFF.
For models without Light button,
you need to long press Mode
button 2 seconds to enabled Light
funtion.