ENGLISH
When the programme has finished a flashing zero is
displayed. The door can be opened when
pilot
light has gone out and if the
option
has not
been
selected.
12 START/PAUSE button
This button has three functions:
Start - Pause
After having selected the required programme, press
this button to start the machine; the corresponding
pilot light stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the
programme or the delay appears on the display.
To interrupt a programme which is running, depress
the START/PAUSE button: the corresponding pilot
light starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
Pause
Start
0
End of programme
13 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on. After the machine has started,
the
(
D
OOR
) pilot light and only the running phase
light illuminate and stay on.
When the programme has finished, the
(
END
)
pilot light comes on and the the
(
D
OOR
) pilot light
goes off.
The
(
D
OOR
) pilot light
indicates if during the
washing cycle the door can be opened:
•
Light on
:
the door can be opened
(when the washer-dryer is set to PAUSE, the
(
D
OOR
) pilot light will go off).
•
Light off
: the door cannot be opened
(when the washer-dryer is set to PAUSE, the
(
D
OOR
) pilot light will start to flash)
The END
pilot light flashes in the event of
operating problems and the buzzer sounds.
At the same time one of the following alarm codes
appear on the display:
E10
= the machine does not fill
E20
= the machine does not empty
E40
= the door has not been closed
To eliminate the problem, see paragraph “Something
not working”.
DOOR
PREWASH
WASH
RINSES
DRAIN
SPIN
SPIN
DRY
END
15
132983170gb.qxd 27/09/2005 13:56 Pagina 15 (Nero/Process Black pellicola)