Electrolux EWX 12550 W, User Manual, Page: 43 / 48

Permanent connection
In the case of permanent connection it
is necessary that you install a double
pole switch between the appliance and
the electricity supply (mains), with a
minimum gap of 3mm between the
switch contacts and of a type suitable
for the required load in compliance with
the current electrical regulations.
The switch must not break the yellow
and green earth cable at any point.
Building-in
This appliance has been designed to
be built into the kitchen furniture. The
recess should have the dimensions
shown in picture A.
When installing the appliance into the
kitchen furniture ensure, if possible, the
hoses are placed in either of the two
recesses on the back of the appliance.
This will help to prevent the hoses from
becoming kinked or trapped.
Preparation and assembly of the
door
The machine is originally pre-arranged
for the assembly of a door opening
from right to left.
P09 65
8
2
0
min
5
70
min.
6
00
596
4
1
6
17
6
,
5
818
54
1
1
95
49
0
1
6
0
1
2
0
9
0
8
5
1
5
1
65
A
6
00
In this case it is sufficient to screw in
the hinges (1) and the counter-magnet
(6) provided with the appliance, at the
right level (Fig. B).
a) Door
The dimensions of the door should be:
- width
595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the
height of the adjacent furniture's base.
b) Hinges
To mount the hinges it is necessary to
drill two holes (dia. 35 mm, depth
12.5-14 mm depending on the depth
of door furniture) on the inner side of
the door. The distance between the
holes hobs fixing centres must be 416
mm.
The distance (B) from upper edge of
the door to the centre of the hole
depends on the adjacent furniture's
dimensions.
35 Ø 1 4 pro f .
16-22
B
C
22+1,5
595-598
416
P0 4 22
C
4
6
5
1
2
3
7
B
P0982
installation electrolux 43
132962570.qxd 29/07/2008 10.02 Pagina 43