Electrolux EWW14791W User Manual Download

Page: 11 / 32

Interrupting a programme

Press the button

to interrupt a programme

which is running, the corresponding green
pilot light starts blinking.
Press the button again to

restart

the pro-

gramme.

Cancelling a programme

Turn the selector dial to

to cancel a pro-

gramme which is running.
You can select now a new programme.

Opening the door

After the programme has started (or during
the delay time) the door is locked, if you need
to open it, set first the machine to PAUSE by
pressing the button

If the door cannot be opened, this means
that the machine is already heating or that the
water level is too high. Do not try to force the
door!
During drying phase the door can be opened
only the first 10 minutes and at the end of
drying (after Anti-Crease phase).
If you cannot open the door but you need to
open it you have to switch the machine off by
turning the selector dial to

. After a few mi-

nutes the door can be opened

(pay atten-

tion to the water level and tempera-
ture!)

After closing the door, it is necessary to se-
lect the programme and options again and to
press button

At the end of the programme

The machine stops automatically. Three
blinking

0.00

appear on the display and the

pilot light of button

goes off. Some acoustic

signals sound for a few minutes.
If a programme or an option that ends with
water left in the tub has been selected, the
door remains locked to indicate that the wa-
ter must be emptied out before opening the
door.
Follow the below instructions to empty out
the water:
1. Turn the programme selector dial to

2. Select the draining or spinning pro-

gramme.

3. Reduce the spin speed if needed, by

pressing the relevant button.

4. Press button

At the end of the programme, turn the pro-
gramme selector dial to

to switch the ma-

chine off.
Remove the laundry from the drum and care-
fully check that the drum is empty. If you do
not intend to carry out another wash, close
the water tap. Leave the door open to pre-
vent the formation of mildew and unpleasant
smells.

Stand By

: If your laundry is not removed

within 10 minutes after the programme is fin-
ished, the back light of the display switches
off and the energy saving system will be en-
abled. Only the pilot light of the button

blinking to indicate that the appliance has to
be switched off. By pressing any button the
appliance will come out from the energy sav-
ing status and you can set another pro-
gramme or switch the appliance off.

Use - Drying

Drying only

Warning!

The recommended load size is 4 kg for cot-
tons and linen, and 3 kg for synthetic items.

By pressing Drying Time button it is also
possible to dry up to 6 kg of cotton items
(see the «Drying Programme » table).

Warning!

The water tap must be open and the
drain hose must be positioned in the
sink or connected to the drain pipe.

1. Load the laundry.
2. Select a spin cycle at the maximum spin

speed allowed for the type of laundry in
order to obtain the best drying perform-
ances.

3. Select the drying programme for Cottons

or Synthetic in the Drying sector of the
programme selector dial.

4. If you wish to select an electronic drying,