ENGLISH 19
Measure out the amount of
detergent required, pour it into the
main wash compartment ( ).
Pull out the dispenser drawer until
it stops.
-
-
If you wish to carry out the
“Prewash” phase, pour it into the
compartment marked .
If required, pour fabric softener
into the compartment marked
(the amount used must not
exceed the “MAX” mark in the
drawer).
-
-
Close the drawer gently.
-
ATTENTION!
If you turn the program selector
dial to another program when
the machine is working, the red
Start/Pause pilot light will flash 3
times and the message “ ”
will appear on the display to
indicate a wrong selection. The
machine will not perform the
new selected program.
The appliance will automatically
adjust the selected program
duration according to the type
and size of the load.
-
The display will show adjusted
program duration.
-
Step 4
- Starting A Program
To start a program, press the
Start/Pause ( ) touchpad, the
corresponding pilot light will stop
flashing and a default program
duration will be displayed on the
screen.
After approx. 15 minutes
from the start of a program:
After washing cycle finish,
residues of detergent, softener
and water may remain in the
dispenser. It is recommended
to clean the dispenser regularly
to remove any residue.
If you use thick softeners it is
recommended to dilute with
water.
*Picture of model: EWW12842
*Picture of model: EWW12842
*Picture of model: EWW12842
*Picture of model: EWW12842
