SELECT THE TEMPERATURE BY
PRESSING BUTTON 2
By selecting a programme, the appliance
proposes automatically a default tempera-
ture.
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a different temper-
ature.
REDUCE THE SPIN SPEED BY
PRESSING BUTTON 3
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button
3
repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant light
illuminates.
SELECT THE AVAILABLE OPTION BY
PRESSING BUTTONS 3, 4 AND 5
Depending on the selected programme, dif-
ferent functions can be combined before
pressing the button
8
. By selecting an op-
tion the relevant pilot light illuminates.
If an incorrect option is selected, the inte-
grated
red
pilot light of the button
8
flashes
3 times and the
Err
message appears on
the display for few seconds.
For compatibility among the washing
programmes and the options see
chapter «Washing Programmes».
SELECT AN ADDITIONAL RINSE
This appliance is designed for saving water.
However, for people with a very delicate
skin (allergic to detergents) it may be nec-
essary to rinse the laundry using an extra
quantity of water (Extra Rinse). To
activate
this option press simultaneously the but-
tons
4
and
6
for some seconds. The pilot
light
9
illuminates. This function stays per-
manently on. To
remove
it press the but-
tons
4
and
6
again until the pilot light
9
goes off.
SELECT THE DELAY START BY
PRESSING BUTTON 6
Before you start the programme, if you wish
to delay the start, press the button
6
re-
peatedly, to select the desired delay. The
relevant pilot light goes on.
The selected delay time value (up to 20
hours) will appear on the display a few sec-
onds, then the duration of the programme
will appear again.
You must select this option after you have
set the programme and before you press
button
8
.
You can cancel or modify the delay time at
any moment, before you press button
8
.
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the
button
6
.
3. Press button
8
:
– the machine starts its hourly count-
down.
– The programme will start after the
selected delay has expired.
Cancelling the delayed start after having
pressed button
8
:
1. Set the washing machine to PAUSE by
pressing button
8
.
2. Press button
6
once until the symbol
0’
is displayed
3. Press button
8
again to start the pro-
gramme.
Important!
The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start
can not
be selected with
DRAIN
programme.
START THE PROGRAMME BY
PRESSING BUTTON 8
To start the selected programme, press the
button
8
, the green pilot light of the button
8
stops blinking.
To interrupt a programme which is running,
press the button
8
: the green pilot light
starts blinking.
To restart the programme from the point at
which it was interrupted, press the button
8
again
. If you have chosen a delayed start,
the machine will begin the countdown. If an
incorrect option is selected, the
red
pilot
light of the button
8
blinks for 3 times the
message
Err
is displayed for a few sec-
onds.
10
electrolux
Summary of Contents for EWW 167443 W
Page 1: ...EWW 167443 W EN WASHER DRYER USER MANUAL ...
Page 31: ...electrolux 31 ...