While the programme is running (after you have
pressed the Start/Pause button), the displayed time
value decreases by one unit every minute.
•
The washer-dryer has stopped with water in the
tub
, at the end of a programme with
option
selected: this is indicated by a
flashing zero
.
•
The washer-dryer has completed the
programme
: this is indicated by a
flashing zero
.
After starting the programme, the remaining time is
updated every minute.
•
Selection of drying time
in minutes.
After starting the programme, the remaining time is
updated every minute.
Important!
If you select a drying time longer then 55’
minutes, after 3 seconds, the display will show it
in hours and minutes (see the example below).
Example:
•
Delay start
, a time value indicated in hours (23
hours max) and selected by means of the relevant
button.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the Start/Pause button, the
countdown is updated every hour, and, for the last
two hours, every 30 minutes.
•
An incorrect option selection has been made
:
this is indicated by the message
Err
when a
function incompatible with the current programme
is selected.
•
12
