manualshive.com logo in svg

Electrolux EWW 126410 W, User Manual

Share
Download
Electrolux EWW 126410 W User Manual Download Page 8

•

Delayed start

The Selected delay set by pressing the rel-
evant button appears on the display for
few seconds, then the duration of the se-
lected programme is displayed again.

•

Alarm codes

In the event of operating problems, some
alarm codes can be displayed, for example

E20

 (see paragraph «What to do if...»).

•

Incorrect option selection

If an option which is not compatible with
the set wash programme is selected, the
message 

Err

 is displayed at the bottom of

the display for a few seconds and the in-
tegrated red light of button 

8

 start flashing.

•

End of programme

When the programme has finished three
flashing zeros are displayed, the pilot light

9

 and the pilot light of button 

8

 go out and

the door can be opened.

7.2:

 

Washing programme phase icons

• Wash 
• Rinses 
• Drain 

• Spin 
• Dry 
By selecting the wash programme, the
washing programme phase icons corre-
sponding to the various phases making up
the programme are shown in the bottom part
of the display. After having pressed button

8

 only the icon of the running phase stays on.

7.3:

 

Soil degree icons

• Intensive 
• Normal 
• Daily 
• Light 
• Quick 
• Super Quick 
• Refresh 
• Super Refresh 
When selecting a programme on the display
appears an icon indicating the degree of soil-
ing automatically proposed by the machine.

7.4:

 

Child safety lock

 

 (see «Child Safety

Lock» paragraph).

First use

• Ensure that the electrical and water

connections comply with the installa-
tion instructions.

• Remove the polystyrene block and

any material from the drum.

• Pour 2 liters of water into the main

wash compartment 

 of the deter-

gent drawer in order to activate the

ECO

 valve. Then run a cotton cycle at

the highest temperature without any
laundry in the machine, to remove any
manufacturing residue from the drum
and tub. Pour 1/2 a measure of de-
tergent into the main wash compart-
ment and start the machine.

Personalisation

Acoustic signals

The machine is provided with an acoustic
device, which sounds in the following cases:
• at the end of the cycle
• if there is a fault.
By pressing the 

4

 and 

5

 buttons simultane-

ously for about 

6 seconds

 , the acoustic

signal is deactivated (except if there is a fault).
By pressing these 2 buttons again, the
acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appli-
ance unattended and not to worry that chil-
dren might be injured by or cause damage to

the appliance. This function remains enabled
also when the washing machine is not work-
ing.
There are two different ways to set this op-
tion:
1. Before pressing button 

8

 : it will be im-

possible to start the machine.

2. After pressing button 

8

 : it will be impos-

sible to change any other programme or
option.

To enable or disable this option press simul-
taneously for about 6 seconds buttons 

5

 and

6

 until on the display, the icon 

 appears or

disappears.

8 

 electrolux

Summary of Contents for EWW 126410 W

































Reviews:

No comments

Brands by name

Popular brands

Load more brands