4
4.2.7. End of the programme
When the selected programme is over, the appliance stops
automatically and the timer knob stays on a stop-position
(the control lamp lights off) or on a rinse hold position (rinse
hold pushbutton pressed). The opening of the lid is only pos-
sible 2 minutes after the washing machine stops.
The programmes end :
•
by a spinning (for all the programmes).
•
by a rinse hold (if you have pressed the rinse hold push-
button). You can finish these programmes by choosing
either the Spinning programme, either the Draining pro-
gramme taking care to release the on/off pushbutton
before doing your choice.
At the end of the cycle, release the on/off pushbutton to
switch the appliance off. Release any other pushbuttons that
are pressed in. Pull out the electricity plug and close the wa-
ter supply tap.
Note: we recommend that you should leave the lid and the
drum open after use to air the washing drum.
