The out of balance has 2 level which are low
level and high level.
The high level: Machine will be stopped,
caused by an uneven distribution of clothes in
the wash bowl. To rectify the out of balance
condition, open the lid and redistribute the
clothes evenly in the wash bowl. Closing the
spin stage of the wash.
The low level: The washing machine try to
optimize by reduce spin speed to avoid out of
balance to finish the cycle.
If you have frequent out of balance
interruptions, it may be due to your
washing machine not standing firm and level
on the floor. This can be corrected by adjust
the washing machine legs as described
in the Installation Instructions supplied with
your machines.
ABOUT YOUR WASHING MACHINE
Out of Balance Interruption
Watch the lights on the control panel to see
the effect pressing a touchpad or turning a
program selector knob has, and listen for
“BEEPS”.
When you press a touchpad you will get a
short “BEEP” to acknowledge the entry.
If the option is not available at the time, the
machine will not allow you to select it. After
the machine has started, the entire wash
option touchpad will be disabled and machine
will give three short beeps to indicate the
touchpad is disabled. The Star/Pause To
Pause touchpad is still active but you need
to
press and hold the touchpad for
minimum 1.2 seconds to pause machine.
This is to con�rm that you really want to pause
the machine.
NOTE:
All functions of the washing machine
will stop when the lid is open.
Your washing machine has selectable
“Auto” sensing water level option as well
as allowing you to choose a manual
water level if you wish. We recommend
you to use the Auto water level option to
ensure there is just the right amount of
water for the wash load in the machine.
In other words, it will usually give you the
best wash while also being the most
ef�cient in terms of water usage.
Auto Water Level Feature
64
Touchpad Response and Lights
Always press touchpads gently.
SAVING WATER AND ENERGY
This washing machine features water and
energy saving options.
Your machine is most water ef�cient when
Eco Rinse is used as the rinse option.
To save energy, the wash time can be shortened
for a load of less dirty clothes by selecting the
appropriate wash program e.g. Fast Wash.
The washing machine is energy ef�cient and most
water ef�cient when used with a full load of clothes
and with Eco Rinse selected. You should use
Eco Rinse (where available) instead of Deep Rinse
to reduce the amount of water used for
rinsing clothes.
Each time you switch on your washing machine the
machine will select most suitable rinse option for
the selected program. You can change rinse option
if you wish. The difference between Deep rinse and
Eco rinse is explained on the page 65.
POWER FAILURE RECOVERY
When there is power failure while
machine is washing or rinsing or
spinning. The machine tries to save
the settings at which stage the
machine is doing and then when
the power returns back the machine
will starts washing from the stage
where it is left off.
