The programme will start after the selected delay has
expired.
• Depress START/PAUSE button
.
• Depress DELAY START button until the required
time is displayed.
If you wish to cancel the delay, depress the button
only once: the symbol
0
h is displayed.
• Depress START/PAUSE button again.
12 DISPLAY
The display shows the following information:
Cancelling - Duration of the programme - Drying
time - Delayed start - Incorrect option selection -
Alarm code.
If a programme has been cancelled - programme
selector dial on position
O
- three flashing dashes
appear on the display.
Now you can select a new programme.
After selecting a programme, the duration is
displayed in hours and minutes ( for example
2.05
).
The duration is calculated automatically on the basis of
the maximum recommended load for each type of fabric.
After the programme has started, the time remaining
is updated every minute.
2.05
Duration of the selected
programme
---
Cancelling
Altering the delayed start
When the programme has finished a flashing zero
is displayed.
If you have selected the Anti-crease option
, the
zero will not flash.
The selected drying time is displayed in minutes or
hours and minutes.
After starting the programme, the remaining time is
updated every minute.
The selected delay (24 hours max) set by means of
the relevant button appears on the display for 4
seconds, then the duration of the previously selected
programme is displayed.
The countdown is updated every hour.
If an option which is not compatible with the set wash
programme is selected, the message Err is
displayed.
Incorrect option selection
Delayed start
1.25
Drying time
40
