Electrolux EWT 106415 W, User Manual, Page: 6 / 16

3.
CLICK
4.
B
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
SELECTION OF DESIRED
PROGRAMME
Turn the programme selector to the re-
quired programme. The “Start/Pause”
pushbutton flashes green.
If you turn the programme selector to an-
other programme while a cycle is in pro-
gress, the appliance will ignore the new se-
lected programme. “Err” flashes and the
“Start/Pause”
pushbutton flashes red for
a few seconds.
SELECTING THE TEMPERATURE
Press the “Temperature” pushbutton re-
peatedly to increase or decrease the tem-
perature (see “Programmes table”). The
symbol means a cold wash.
SELECTING THE SPIN SPEED
Press the “Spin” pushbutton to change
the spin speed.
The maximum spin speeds are :
for Cottons, Eco, Wool/Handwash, Linge-
rie, Jeans : 1000 rpm, for Synthetics, Easy
iron, Intensive sport : 900 rpm, for Deli-
cates, Silk, Sport : 700 rpm.
At the end of the programme, if you have
selected “Rinse hold”
or “Night silence
plus” , you then need to select a “Spin”
or “Drain” programme to finish the
cycle and empty the water.
Night silence plus : this cycle eliminates
all spin speed phases and ends with rinse
hold. This cycle is very quite and can be
used during the night.
SELECTING OPTIONS
You must select the different options after
selecting the programme and before press-
ing the “Start/Pause”
pushbutton (see
“Programme table”). Press the desired but-
ton(s) ; the corresponding lights come on. If
pressed again, the lights go out. If one of
the options is not compatible with the se-
lected programme, “Err” flashes on the dis-
play and the “Start/Pause”
pushbutton
flashes red.
“PREWASH” OPTION
The appliance runs a prewash at 30°C
max.
“RINSE PLUS” OPTION
The washing machine will add one or more
rinses during the cycle. This option is rec-
ommended for people with sensitive skin
and in soft water areas.
Temporary : Press the “Rinse plus”
pushbutton. The option is only active for the
selected programme.
Permanent : Hold down the “Prewash”
and “Delay Start”
pushbuttons for a few
seconds. The option is permanently activa-
6 electrolux