background image

PROPORTIONING OF DETERGENTS

Pour the amount of washing into the wash-
ing 

 and prewash 

 compartments if

you have selected the “prewash” option.
Pour fabric softener into the compartment

 if necessary.

SELECTION OF DESIRED
PROGRAMME

Turn the programme selector to the re-
quired programme. The “Start/Pause” 
pushbutton flashes green.
If you turn the programme selector to an-
other programme while a cycle is in pro-
gress, the appliance will ignore the new se-
lected programme. “Err” flashes and the
“Start/Pause” 

 pushbutton flashes red for

a few seconds.

SELECTING THE TEMPERATURE

Press the “Temperature”   pushbutton re-
peatedly to increase or decrease the tem-
perature (see “Programmes table”). The 
symbol means a cold wash.

SELECTING THE SPIN SPEED

Press the “Spin” 

 pushbutton to change

the spin speed.
The maximum spin speeds are :
for Cottons, Eco : 1300 rpm
(EWT135410W), 1000 rpm
(EWT105410W), for Wool, Lingerie, Jeans :
900 rpm (EWT135410W), 1000 rpm
(EWT105410W), for Synthetics, Easy iron,
Intensive sport : 900 rpm, for Delicates,
Silk, Sport : 700 rpm.
At the end of the programme, if you have
selected “Rinse hold” 

 or “Night silence

plus” 

 , you then need to select a “Spin”

 or “Drain”   programme to finish the cy-

cle and empty the water.

Night silence plus :

 the cycle contains no

spin and ends with a rinse hold.

SELECTING OPTIONS

You must select the different options after
selecting the programme and before press-
ing the “Start/Pause” 

 pushbutton (see

“Programme table”). Press the desired but-
ton(s) ; the corresponding lights come on. If
pressed again, the lights go out. If one of
the options is not compatible with the se-

lected programme, “Err” flashes on the dis-
play and the “Start/Pause” 

 pushbutton

flashes red.

“PREWASH” OPTION 

The appliance runs a prewash at 30°C
max.

“RINSE PLUS” OPTION 

The washing machine will add one or more
rinses during the cycle. This option is rec-
ommended for people with sensitive skin
and in soft water areas.
Temporary : Press the “Rinse plus” 
pushbutton. The option is only active for the
selected programme.
Permanent : Hold down the “Prewash” 
and “Delay Start” 

 pushbuttons for a few

seconds. The option is permanently activa-
ted, even if the appliance is switched off. To
deactivate it, repeat the process.

“DELAY START” 

This option allows you to delay the start of a
wash programme by 30, 60, 90, 2 hours to
20 hours. The selected time appears on the
display for a few seconds.
You can change or cancel the delayed start
time at any time before you press the
“Start/Pause” 

 pushbutton, by pressing

the “Delay start” 

 pushbutton again (   

indicates immediate start).
If you have already pressed the “Start/
Pause” 

 pushbutton and you want to

change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delayed start and start the

cycle immediately, press “Start/Pause”

 and then “Delay start” 

 . Press

“Start/Pause” 

 to start the cycle.

• To change the timer delay period, you

must go through the “Stop”   position
and reprogramme your cycle.

The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
“Start/Pause” 

 pushbutton. After closing

the lid again, press the “Start/Pause” 
pushbutton.

electrolux 

5

Summary of Contents for EWT 105410 W

















Reviews: