Electrolux EWS 1266CIU, User Manual

Page: 16 / 28

10.8 Starting a programme with
the delay start
1. Press again and again until the
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
:
• The appliance starts the
countdown.
• The door locks, the display shows
the indicator .
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
. To
cancel the delay start:
• Press to set the
appliance to pause.
• Press until the
display shows '.
• Press again to
start the programme
immediately.
10.9 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Press .
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
10.10 Cancelling a running
programme
1. Press the button for some
seconds to cancel the programme
and to deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.11 Opening the door when
the delay start operates
While the delay start operates, the
appliance door is locked and the display
shows the indicator
.
1. Press to pause the appliance.
The indicator starts flashing.
2. Wait about 2 minutes until the door
lock indicator stops flashing and
goes off.
3. Open the door.
4. Close the door.
5. Press
again. The indicator
appears again on the display.
The delay start continues to operate.
10.12 Opening the door when
the programme operates
While the programme operates, the
appliance door is locked and the display
shows the indicator
.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the door.
1. Press the button for some
seconds to deactivate the appliance.
2. Wait for some minutes and then open
carefully the appliance door.
3. Close the appliance door.
4. Set the programme again.
10.13 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
www.electrolux.com 16