background image

CONTROL PANEL

Below is a picture of the control panel. It shows the programme selector dial as well as
the buttons, pilot lights and the display. These are presented by relevant numbers on
the following pages.

1

2

3

4

5

6

7

8

9

1

Programme selector dial

2

Display

3

TEMPERATURE button (

Temp.

)

4

SPIN reduction button (

Wirowanie

)

5

PREWASH button (

Pranie wst

ę

pne

)

6

EXTRA RINSE button (

Dodatkowe

p

ł

ukanie

)

7

DELAY START button (

Opó

ź

niony

start

)

8

START/PAUSE button (

Start/Pauza

)

9

TIME MANAGER buttons

 

PROGRAMME SELECTOR DIAL

It allows you to switch the appliance on/off
and/or to select a programme.

TEMPERATURE

This button allows you to increase or de-
crease the washing temperature.

SPIN REDUCTION

By pressing this button you can change the
spin speed of the selected programme.

PREWASH

By selecting this option the machine per-
forms a prewash cycle before the main
wash phase. The washing time will be pro-
longed. This option is recommended for
heavily soiled laundry.

EXTRA RINSE

This appliance is designed to save energy.
If it necessary to rinse the laundry using an
extra quantity of water (extra rinse), select
this option. Some additional rinses will be
performed. This option is recommended for
people who are allergic to detergents, and
in areas where the water is very soft.

DELAY START

The programme can be delayed from 30
min - 60 min - 90 min, 2 hours and then by
1 hour up to a maximum of 20 hours by
means of this button.

START PAUSE

This button allows you to start or to inter-
rupt the selected programme.

electrolux 

5

Downloaded From WashingMachine-Manual.com Manuals

Summary of Contents for EWS 126540 W





























Reviews: