![Electrolux EWS 106410 W User Manual Download Page 6](http://html.mh-extra.com/html/electrolux/ews-106410-w/ews-106410-w_user-manual_100521006.webp)
Time Manager
These buttons allows you to modify the
programme duration automatically pro-
posed by the appliance.
Door locked pilot light
The pilot light
9
illuminates when the pro-
gramme starts and indicates if the door can
be opened:
• light on: the door cannot be opened. The
machine in working or has stopped with
water left in the tub.
• light off: the door can be opened. The
programme is finished or the water has
been emptied out.
• light flashing: the door is opening
Display
7.4
7.5
7.1
7.2
7.3
The display shows the following informa-
tion:
7.1:
•
Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample
2.05
). The duration is calculated
automatically on the basis of the maxi-
mum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every mi-
nute.
•
Delayed start
The Selected delay set by pressing the
relevant button appears on the display for
few seconds, then the duration of the se-
lected programme is displayed again.
•
Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for exam-
ple
E20
(see paragraph «What to do
if...»).
•
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message
Err
is displayed at the bottom
of the display for a few seconds and the
integrated red light of button
8
start flash-
ing.
•
End of programme
When the programme has finished three
flashing zeros are displayed, the pilot light
9
and the pilot light of button
8
go out
and the door can be opened.
7.2:
Washing programme phase icons
• Wash
• Rinses
• Drain
• Spin
By selecting the wash programme, the
washing programme phase icons corre-
sponding to the various phases making up
the programme are shown in the bottom
part of the display. After having pressed
button
8
only the icon of the running phase
stays on.
7.3:
Heating phase
During the washing cycle the display shows
a temperature icon indicating that the appli-
ance has started the heating phase of the
water in the tub.
6
electrolux