• Remove the polystyrene packaging ma-
terials.
• Spread the front piece on the floor be-
hind the appliance and then lay the appli-
ance carefully rear side down on it. Make
sure that no hoses are crushed in the
process.
• Remove the polystyrene base from the
bottom.
2
1
• Return appliance to the upright position.
• Open the door and remove the plastic
hose guide, the bag containing the in-
struction booklet and the plastic plug
caps from the drum.
• Remove the power supply cable and the
draining and inlet hose from the hose
holders on the rear of the appliance.
• Unscrew the three bolts and remove the
hose holders.
• Slide out the relevant plastic spacers.
Warning!
Do not remove the drain
hose from the rear support.
Remove this hose only if it is
necessary to drain the water. Refer
to "Frost precaution" and "What to
do if".
electrolux
7