Electrolux EWN 12791 W, User Manual

Page: 17 / 92

use electrolux 17
GB
Interrupting a programme
Depress the Start/Pause button to
interrupt a programme which is running,
the corresponding light starts to flash.
Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to O to cancel a
programme which is running. Now you
can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by pressing
the Start/Pause button.
If the “door”
icon desappears on the
display, the door can be opened.
If the “door”
light does not goes off,
this means that the machine is already
heating, that the water level is above the
bottom edge of the door or that the drum
is turning. In this case the door can not be
opened.
If you cannot open the door but you need
to open it you have to switch the machine
off by turning the selector dial to
O . After
about 3 minutes the door can be opened
(pay attention to the water level and
temperature!)
.
At the end of the programme
The machine stops automatically. Some
acoustic signals sound for 2 minutes.
If the Rinse Hold or Night Cycle
options have been selected, the
Start/Pause light goes off, a flashing
“
0.00
” will appear on the display, the
(Door) icon is still visualized and the door
remains locked to indicate that the water
must be emptied out before opening the
door.
To empty out the water please read the
steps on the Rinse Hold option
paragraph.
At the end of the cycle, turn the programme
selector dial to
O to switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty. If
you do not intend to carry out another
wash, close the water tap. Leave the door
open to prevent the formation of mildew
and unpleasant smells.
132972480 (GB+E).qxd 19/06/2007 9.54 Pagina 17