background image

40

electrolux

building-in

In this case it is sufficient to screw in the
hinges (1) and the counter-magnet (6)
provided with the appliance, at the right
level (Fig. B).

a) Door

The dimensions of the door should be:
- width

595-598 mm

- thickness  16-22 mm
The height (C-Fig. C) depends on the
height of the adjacent furniture's base.

b) Hinges

To mount the hinges it is necessary to
drill two holes (dia. 35 mm, depth 12.5-
14 mm depending on the depth of door
furniture) on the inner side of the door.
The distance between the holes hobs
fixing centres must be 416 mm.

35

 Ø  1

2.5

-1

4

 

dep

th

16-22

B

C

22+1,5

595-598

416

P0

4

22S

C

4

1 2

3

6

1

2

3

P0

9

82

7

B

5

Building-in

This appliance has been designed to
be built into the kitchen furniture.
The recess should have the dimen-
sions shown in picture A.

When installing the appliance into the
kitchen furniture ensure, if possible, the
hoses are placed in either of the two
recesses on the back of the appliance.
This will help to prevent the hoses from
becoming kinked or trapped. Picture
AB.

Preparation and assembly of
the door 

The machine is originally pre-arranged
for the assembly of a door opening
from right to left.

P0

965

8

2

min

5

70 

min.

6

00

596

4

1

6

17

6

,

5

818

54

1

1

95

49

0

1

6

0

1

2

0

9

0

8

5

1

5

1

65

A

6

00

132973570 EN.qxd  07/05/2007  13.51  Pagina  40

Summary of Contents for EWG 14740 W

















































Reviews: