background image

22       www.electrolux.com

 CARE AND CLEANING

8.

You must DISCONNECT the 
appliance from the electricity 
supply, before you can carry out 
any cleaning or maintenance 
work.

The water we use normally 
contains lime. It is a good idea to 
periodically use a water softening 
powder in the machine. 

Clean the appliance only with soap 
and warm water. Fully dry all the 
surfaces.

Do not use alcohol, solvents or 
chemical products.

Do this separately from any laundry 
washing, and according to the 
softening powder manufacturer's 
instructions. 
This will help to prevent the 
formation of lime deposits.

8.2 Descaling

8.1 External Cleaning

The washing powder and additive 
dispenser drawer should be 
cleaned regularly.
Remove the drawer by pressing 
the catch downwards and by 
pulling it out. Flush it out under a 
tap, to remove any traces of 
accumulated powder.

8.5 Cleaning The Dispenser 
      Drawer

Leave the door open for a while. 
This helps to prevent mould and 
stagnant smells forming inside the 
appliance. Keeping the door open 
after a wash will also help to 
preserve the door seal.

8.3 After Each Wash

With the use of low temperature 
washes it is possible to get a build 
up of residues inside the drum.
We recommend that a 
maintenance wash be performed 
on a regular basis.

8.4 Maintenance Wash

The drum should be empty of 
laundry.
Select the hottest cotton wash 
program.
Use a normal measure of 
detergent, must be a powder 
with biological properties.

To run a maintenance wash:

WARNING!

CAUTION!

1

2

3

Summary of Contents for EWF12822









































Reviews: